Click here to make tpub.com your Home Page

Page Title: Load test of No. 2 gear and pinion assembly
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-F-48057B (AR)
AMENDMENT 7
4.5.5.2:  Delete "Apply a" and substitute "Apply the required".
Delete "resistive" and substitute "required".
4.5.5.3:  Delete "Apply a" and substitute "Apply the required".
Delete "resistive" and substitute "required".
PAGE 54
Delete in its entirety and substitute:
4.5.5.4:
"4.5.5.4 Load test of No. 1 gear and pinion assembly.
Apply the required axial load perpendicular to the No. 1 gear
and in such a direction as to test the assembly of the No. 1
gear and pinion. The required force shall act against the No.
1 gear. Upon removal of the required force, the maximum
permissible gap shall be inspected for compliance with the
drawing requirement. Any No. 1 gear and pinion assembly that
fails the requirement shall be classed defective and removed
from the lot."
4.5.5.5:
Delete in its entirety and substitute:
"4.5.5.5 Load test of No. 2 gear and pinion assembly.
Apply the required axial load perpendicular to the No. 2 gear
in such a direction as to test the assembly of the No. 2 gear
and pinion. The required force shall act against the No. 2
gear. Upon removal of the required force, the maximum
permissible gap shall be inspected for compliance with the
drawing requirement. Any No. 2 gear and pinion assembly that
fails the requirement shall be classed defective and removed
from the lot."
4.5.5.6:
Delete in its entirety and substitute:
"4.5.5.6 Load test of escapement gear and pinion
assembly.
Apply the required axial load perpendicular to the
escapement gear and in such a direction as to test the
assembly of the escapement gear and pinion. The required
force shall act against the escapement gear. Upon removal of
the required force, the maximum permissible gap shall be
inspected for compliance with the drawing requirement. Any
escapement gear and pinion assembly that fails the requirement
shall be classed defective and removed from the lot."
11

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business