Fuze, PD, M567/XM935 Less Booster

• Fuze, PD, M567/XM935 Less Booster
• Other Government documents, drawings, and publications
• Components and assemblies
• Arming and ballistic functioning
• Surface porosity
• Interior porosity
• Detonator push-out test
• Sample sizes M567 fuze
• Sample sizes XM935 fuze
• Inspection to be performed
• Table 1. First article inspection
• Fuze, PD, M567/XM935, Less Boosters with Components and Assemblies
• Fuze, PD, M567/XM935, Less Boosters with Components and Assemblies-cont.
• Fuze, PD, M567/XM935, Less Boosters with Components and Assemblies-cont.
• Fuze, PD, M567/XM935, Less Boosters with Components and Assemblies-cont.
• Fuze, PD, M567/XM935, Less Boosters with Components and Assemblies-cont.
• Fuze, PD, M567/XM935, Less Boosters with Components and Assemblies-cont.
• Fuze, PD, M567/XM935, Less Boosters with Components and Assemblies-cont.
• Fuze, PD, M567/XM935, Less Boosters with Components and Assemblies-cont.
• Fuze, PD, M567/XM935, Less Boosters (Front Body Assembly) Destructive Testing-cont.
• Fuze, PD, M567/XM935, Less Boosters (Front Body Assembly) Destructive Testing-cont.
• Quality conformance inspection
• Classification of Defects & Tests
• Body, Outer, Front
• Body, Inner, Right Half (Die Check)
• Body, Inner, Right Half (Die Check)
• Body, Inner Right Half (Production Verification)
• Body, Inner, Left Half (Die Check)
• Body, Inner, Left Half (Die Check)-cont.
• Body, Inner, Left Half (Production Verification)
• Sleeve, Lead Cup
• Body, Inner, Left Half, Assembly
• Latch, Safety (Die Check)
• Latch Safety (Production Verification)
• Inner Body Subassembly
• Holder, Delay Element (Die Check)
• Holder, Delay Element (Die Check)-cont.
• Holder, Delay Element (Production Verification)
• Delay Assembly
• Spacer, Front Body
• Inner Body Assembly
• Pin, Setback
• Spring, Setback Pin
• Striker
• Disk
• O-Ring (Mold Check)
• O-Ring (Production Verification)
• Spring, Firing Pin
• Pin, Firing, Holder
• Pin, Firing Holder-cont.
• Pin, Firing, Point
• Firing Pin Subassembly
• Firing Pin Assembly
• Body, Subassembly, Prior to Assembly Firing Pin Detent Ball
• Body Subassembly, Front
• Plate, End, Slider (Die Check)
• Plate, End, Slider (Production Verification)
• Slider (Die Check)
• Slider (Die Check)-cont.
• Slider (Production Verification)
• Spring, Slider Detent
• Detent, Slider
• Slider Assembly
• Slider Loaded Assembly
• Spring, Slider Outer
• Spring, Slider, Inner
• Cap, Selector (Mold Check)
• Cap, Selector (Production Verification)
• Ring, Selector
• Plug, Retainer
• Windshield
• Pull Wire Assembly
• Label, Warning
• Body Assembly, Front, M567
• Body Assembly, Front - Special
• Body, Rear (Die Check) After Machining
• Body, Rear (Die Check), After Machining
• Body, Rear (Production Verification) After Machining
• Support, Aft (Mold Check)
• Support, Aft (Production Verification)
• Pad, Felt
• Fuze, PD, M567, Less Boosters
• Body Assembly, Front XM935
• Cup, Booster, XM935
• Cap, Shipping
• Fuze, PD, XM935, Less Boosters
• Fuze, PD, M567, Less Boosters (Front Body Assembly) Destructive Lot Acceptance Testing
• Fuze, PD, M567, Less Boosters (Front Body Assembly) Destructive Lot Acceptance Testing-cont.
• Fuze, PD, XM935, Less Boosters (Front Body Assembly) Destructive Lot Acceptance Testing
• Fuze, PD, XM935, Less Boosters (Front Body Assembly) Destructive Lot Acceptance Testing-cont.
• Packing & Marking for Box, Fiberboard, Inner for Fuze, PD, M567, Less Boosters, or Fuze, PD, XM935, Less Boosters
• Packing & Marking for Box, Fiberboard, Outer for Fuze, PD, M567 Less Boosters, or Fuze, PD XM935 Less Boosters
• Pin, Groove
• Dimensional control of molded and die cast components
• Freedom of latch test
• Slider cavity function and safety test
• Front body assembly leak test
• Jolt and jumble test
• Arming and ballistic functioning
• Firing pin subassembly torque test
• Double sampling for SQ phase
• Data requirements
• Check test for deterioration of detonators and delay elements
• Quality conformance test
• Changes from previous issue
• Schematic drawing
• Schematic drawing
• Schematic drawing
• Standardization Document Improvement Proposal
• Postage and Fees Paid
• Blank Page

Fuze, PD, M567/XM935 Less Booster

Privacy Statement - Press Release - Copyright Information. - Contact Us