 |
|||
|
Page Title:
Figure 2. Terminal-peak sawtooth shock pulse configuration and tolerance limits |
|
||
| ||||||||||
|
|  MIL-F-62564(AT)
P = Peak value = 40 g
D = Nominal duration = 11 ms
NOTE:
The oscillogram shall include a time about 3D long with a pulse located
approximately in the center. The peak acceleration magnitude of the sawtooth
pulse is P and it's duration is D. The measured acceleration pulse shall be
contained between the broken line boundaries and the measured velocity change
(which may be obtained by integration of the acceleration pulse) shall be within
the limits of Vi + 0.1 Vi where Vi is the velocity-change associated with the ideal
pulse which equals 0.5 PD. The integration to determine velocity change shall
extend from 0.4D before the pulse to 0.lD after the pulse.
FIGURE 2. Terminal-peak sawtooth shock pulse configuration and tolerance
limits.
19
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals