 |
|||
|
|
|||
| ||||||||||
|
|  MIL-F-70673 (AR)
4.1.1 Responsibility for compliance. All items must meet all
requirements of Sections 3 and 5. The inspection set forth in this
specification shall become a part of the contractor's overall
inspection system or quality program. The absence of any
inspection requirements in the specification shall not relieve the
contractor of the responsibility of assuring that all products or
supplies submitted to the Government for acceptance comply with all
requirements of the contract. Sampling in quality conformance does
not authorize submission of known defective material, either
indicated or actual, nor does it commit the Government to
acceptance of defective material.
4.2 Classification of inspections. The following types of
inspection shall be conducted on this item:
a.
First Article Inspection
b.
Quality Conformance Inspection
4.3 First article inspection.
4.3.1 Submission. The contractor shall submit a first
article sample as designated by the Contracting Officer for
evaluation in accordance with provisions 4.3.2. The first article
sample shall consist of the following items in sample quantities as
. dicated
indicated.
Drawing number
Part description
Quantity
Lid, Case, Fuze
9298750
5 per mold cavity
Case, Fuze
9298742
5 per mold cavity
Spacer, Fuze
9298747
25
25
Expulsion Charge Assembly
9298752
Delay Assembly
25
9341730
Fuze, Rocket, Base
100
9298733
Detonating M442
4.3.2 Inspections to be performed.
See MIL-A-48078 and
Table I specified herein.
4.3.3 Rejection.
See MIL-A-48078.
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals