Responsibility for inspection.

Page Title: Responsibility for inspection.
Back | Up | Next

Web
www.tpub.com

Information Categories

....

MIL-F-81150A(OS)

3.6 Cleanup. Prior to and after final assembly all parts, components,

and the assembly shall be thoroughly cleaned of loose, spattered, or ex-

cess solder, metal chips, and other foreign matter. Burrs and sharp edges,

as well as excessive rosin flash, shall be removed.

3.7 Workmanship. The bandpass filter, including all parts and acces-

sories, shall be constructed and finished in a manner to ensure compliance

with all requirements of this specification. Particular attention shall

be paid to neatness and thoroughness of soldering, wiring, impregnation

of coils, marking of parts and assemblies, plating, painting, riveting,

machine screw assemblage, welding, brazing, and freedom of parts from

burrs and sharp edges. The standards of workmanship exhibited in any

approved preproduction sample, subject to any qualification stated in the

Government's notice of approval, shall be determinative of the require-

ments of the contract relative to workmanship insofar as not specifically

covered by applicable specifications.

4. QUALITY ASSURANCE PROVISIONS

4.1 Responsibility for inspection. Unless otherwise specified in the

contract or purchase order, the supplier is responsible for the perform-

ance of all inspection requirements as specified herein. Except as other-

wise specified in the contract or order, the supplier may use his own or

any other facilities suitable for the performance of the inspection re-

quirements specified herein, unless disapproved by the Government. The

Government reserves the right to perform any of the inspections set forth

in the specification where such inspections are deemed necessary to as-

sure supplies and services conform to prescribed requirements.

4.2 Classification of inspections.

Inspection of the bandpass filters

shall be classified as follows:

(a) Preproduction inspection (paragraph 4.5)

(b) Quality conformance inspection (paragraph 4.4)

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business