|
| MIL-F-81966(AS)
TABLE 30 CLASSIFICATION OF CHARACTERISTICS FOR
FUZE FUNCTION CONTROL SET AN/AWW-4(V)
NOTES :
This CC covers only those design requirements which affect safety,
A.
performance, interchangeability, maintainability, and reliability of
items of Government procurement.
B.
Conformance with the requirements of this CC does not relieve the
contractor of the responsibility for meeting all applicable
specification and drawing requirements.
In case of conflict between requirements of this CC and subsequent
c.
revisions of applicable specifications and drawings, the latest
revision of the drawing or specification takes precedence.
Sampling and acceptance procedures shall be in accordance with
D.
MIL-STD-105, unless otherwise specified in this specification.
Reference:
E.
(1) Paragraph numbers are those of this specification.
(2) Drawing numbers are those of DL 125AS1OOO, DL 126AS1OO,
DL67A21D1, DL 67A22D1, DL 203AS1OO, DL 67A24F1, and
. DL 67A35F1.
Characteristics, classified as critical or major are recommended for
F.
Mandatory Inspection [H-57).
Characteristics with numbers followed by the suffix "(S)" (Special),
G.
unless covered by a specified sampling plan, shall be verified to
the satisfaction of the Government representative.
A.
AN/AWIY-4(V] Assembly (Dwg. 67A24F1)
CRITICAL - AQL not defined, 100% inspection, no defects allowed
Wheel interlock operation (Ref. para. 3.4.11}
1.
AQL 1.0 percent cumulative for all parameters
MAJOR -
No load voltage adjustment at standard input (VT) (Ref. para. 3.4.1.1)
101.
No load voltage adjustment at standard input (INST) (Ref. para. 3.4.1.2)
102.
No load voltage at standard input (VT) (Ref. para. 3.4.2.1)
103.
No load voltage at standard input (DLY 2) (Ref. para. 3.4.2.2)
104.
NO load voltage at standard input (INST) (Ref. para. 3.4.2.3)
105.
No load voltage at standard input (DLY 1) (Ref. para. 3.4.2.4)
106.
23
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |