 |
|||
|
|
|||
| ||||||||||
|
|  MIL-F-8615D
4.3.2 Disposition of test articles. All items subjected to test shall be
available for the first article inspection and thereafter shall be retained
or delivered to the procuring agency in accordance with the contract require-
ments.
The quality conformance inspections
4.4 Quality conformance inspections.
shall consist of individual tests.
4.4.1 Individual tests. Each assembly shall be subjected to individual
tests prior to delivery in accordance with the detail specification. This
will normally consist of at least the following.
a.
Examination
b.
Break-in-run
c.
Leakage
d.
Calibration
e.
Electrical insulation tests.
These will consist of at least the
accordance with the item specification.
following:
(4.5.5)
a.
Calibration
(4.5.15).
Strength
b.
4.5 Inspection methods. Unless otherwise specified, the atmospheric pressure
and temperature shall be the local ambient.
4.5.1 Test fluid. Unless otherwise specified, the test fluid shall be the
principal fluid the component shall experience in use. For quality conform-
ance inspections, the test fluid shall be in accordance with the item
specification.
4.5.2 Examination of product. All component assemblies shall be inspected
and certified to be in accordance with the applicable drawings and specifi-
cations, including all requirements of Section 3 for which tests are not
appropriate. The units shall be of satisfactory workmanship, within the
weight allowance, clean and free of contaminants, oil, grease, preservatives
or any other material not specified on the assembly drawings.
14
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals