|
| ![]() MIL-G-48204(MU)
Minor
201. Marking, legible and correct . . . . . . . . . . . . . . . . . . Visual
202. Workmanship (see 3.3) . . . . . . . . . . . . . Visual/Manual
4.3.3 Testing: Not applicable.
4.3.4 Acceptance inspection equipment.
4.3.4.1 Critical and major characteristics and tests.
Not applicable.
4.3.4.2 Minor characteristics and tests. Acceptance in-
spection equipment for minor characteristics is not specified
on EL's, The acceptance inspection equipment, operating in-
structions and calibration instructions used by the contractor
for minor classification inspection shall be approved by the
Government representative authorized by the procuring activity.
4.4 Test methods. Not applicable.
PREPARATION FOR DELIVERY
5.
5.1 Preservation and packaging. Presentation and packag-
ing shall be level A or C, as specified (see 6.1).
5.1.1 Level A. The grommet assembly shall be packaged
in accordance with dwg 8858986 and 8808362, using the speci-
fied moisture barrier.
5.1.2 Level C. The grommet assembly shall be packaged
in accordance with dwg 8858986 and 8808362, except that the
moisture barrier may be omitted,
5.2 Packing.
5.2.1 Levels A and C. The grommet assembly shall be
Packed in accordance with dwg 8858986 and 8808362.
5.3 Marking. Marking shall be as specified in accordance
with dwg 8858986 and 8808362, as applicable.
NOTES
6.
6.1 Ordering data. procurement documents should specify
the following:
Title, number and date of this specification.
b. Selection of applicable level of packaging and
packing required (see 5.1 and 5.2).
7
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |