 |
|||
|
|
|||
| ||||||||||
|
|  MIL-G-81737A(AS)
(Copies of specifications, standards, handbooks, drawings, and publications
required by manufacturers in connection with specific acquisition functions
should be obtained from the contracting activity or as directed by the
contracting officer.)
2.2 Other publications. The following documents form a part of this
specification to the extent specified herein.
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
Turbine Fuels, Specification for
ASTM 01655-83
(Application for copies of ASTM publications should be addressed to the
American Society for Testing and Materials, 1916 Race Street, Philadelphia,
PA 19103.)
UNIFORM CLASSIFICATION COMMITTEE, Agent
Uniform Freight Classification Rules
(Application for copies should be addressed to the Uniform Classification
Committee, Room 1106, 222 South Riverside Plaza, Chicago, IL 60606.)
2.3 Order of precedence. In the event of a conflict between the text of
this specification and the references cited herein, the text of this
specification shall take precedence.
REQUIREMENTS
3.
3.1 First article. When specified, a sample shall be subjected to first
article inspection (see 4.4 and 6.3).
3.2 Selection of specifications and standards. Specifications and
standards for necessary commodities and services not specified herein shall be
selected in accordance with MIL-STD-143.
3.3 Materials. Materials shall conform to applicable specifications and
drawings, and shall be as specified herein. Materials which are not covered
by specifications, or which are not specifically described herein, shall be of
the best quality, of the lightest practical weight, and suitable for the
purpose intended.
3.3.1 Metal parts. All metal parts shall be of corrosion resistant
material or treated in a manner to render them adequately resistant to
corrosion.
3.3.1.1 Dissimilar metals. Unless suitably protected against electrolytic
corrosion, dissimilar metals shall not be used in intimate contact with each
other. Dissimilar metals are defined in MIL-STD-889.
3.4 Design and construction. The design and construction of the Mod 0
unit shall be in accordance with the applicable drawings listed on DL2581669
and the Mod 1 unit shall be in accordance with the applicable drawings listed
on DL1558AS100, and the requirements listed herein.
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals