Metallic Materials and Elements for Aerospace
Electromagnetic Compatibility Management Guide for
Platforms, Systems and Equipment.
2.1.2 Other Government documents, drawings, and publications. The
following other Government documents, drawings, and publications form a part of
this specification to the extent specified herein.
DOD Contractors' Safety Manual for Ammunition,
Explosives, and Related Dangerous Material.
(Copies of specifications, standards, drawings, and publications required by
contractors in connection with specific procurement functions should be obtained
from the procuring activity or as directed by the contracting officer.)
The following documents(s) form a part of this
2.2 Other publications.
specification to the extent specified herein. The issues of the documents which
are indicated as DoD adopted shall be the issue listed in the current DoDISS and
the supplement thereto, if applicable.
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM E 380-76
Metric Practice Guide.
(Application for copies should be addressed to the American Society for
Testing and Materials, 1916 Race Street, Philadelphia, PA. 19103.)
General Electric Company
(Code Ident 05606)
Prime Item Development Specification for Cartridge,
25mm, PGU-20/U (API).
(Application for copies should be addressed to the General Electric Company
Armament Systems Department, Lake Side Avenue, Burlington, VT 05402.)
2.3 Order of precedence. In the event of a conflict between the test of this
specification and the references cited herein, the test of this specification
shall take precedence.
3.1 Item description. The gun system is a double-ended percussion fired 25
millimeter (urn) automatic gun system intended for mounting on the AV-8 aircraft.
The gun system consists of a gun pak mounted on the port side of the fuselage, and
ammunition storage and handling pak mounted on the starboard side of the
fuselage, and an ammunition crossover unit with chuting and conveyor to transfer