manner to provide protection from damage during delivery to the first receiving
5.2 Marking. The exterior of the shipping container shall be marked in
accordance with MIL-STD-129.
6. Intended use. The gun system is intended to provide 25mm fire power when
installed on the AV-8 aircraft. The gun, a major component of the gun system, is
intended to provide 25mm fire power when mounted internally in aircraft$ in gun
pods, or on surface vehicles.
6.2 Ordering data. Procurement documents should specify the following:
Title, number, and date of this specification.
Government-furnished property (see 3.1.4).
Preservation-packaging (see 5.1).
Fungus test, if required (see 184.108.40.206).
Drawings required (see 3.4.1).
Test plans required (see 3.4.3).
Failure reports (see 4.3.3).
High impact test, if required (see 220.127.116.11.2).
Reliability program, if required (see 3.2.3).
Interference control plan (see 3.3.2).
Integrated logistics support (see 3.5).
Personnel and training (see 3.6).
Responsibility for inspection, if other than as specified in 4.1.1.
6.3.1 True boresight point. The true boresight point of the gun is defined
as the geometric center of all the individual barrel boresight points generated
when each of the barrels is in the indexed firing position. Each individual
barrel boresight point is determined by inserting a boresight tool in the muzzle
of the barrel and marking a target at 25.4 m.
6.3.2 Steady state firing. Steady state firing is continuous firing of a
least thirty rounds within the firing rate specified in 18.104.22.168.
6.3.3.Stoppage. A stoppage occurs when gun firing is involuntarily
interruped and connot be resumed by the use of the remote gun system control.