|
| MIL-G-85231(AS)
5.4 General.
Exterior containers (see 5.2.1 and 5.2.2)
5.4.1 Exterior containers.
shall be of a minimum tare and cube consistent with the protection required
and shall contain equal quantities of identical stock numbered items to the
greatest extent practicable.
The inspection of these packaging
5.4.2 Packaging inspection.
requirements shall be in accordance with 4.11.
NOTES
6.
6.1 Intended use. The control group is airborne equipment and is
intended to interface with the AN/AWW-7B and AN/AWW-9 Data Pods to provide
cockpit control of the WALLEYE Data Link Guided Weapons when it becomes
necessary to retarget or steer the weapon.
6.2 Ordering data.
Acquisition documents should specify the
6.2.1 Acquisition requirements.
following:
Title, number, and date of this specification.
a.
b.
If first article inspection is required (see 3.1, 6.3).
Additional individual tests, if required (see 4.5.1 and table
c.
VII).
Lot acceptance for each lot, if other than specified in
d.
4.5.3.2.1.
Test procedure modifications or additional tests, if required
e.
(see 4.9).
Selection of applicable levels of packaging and packing (see
f.
5.1).
Preservation and packing, Level A or industrial (see 5.1 and
g.
5.3),
Unit packs, if other than specified in 5.1.1.3.
h.
i. If special or other identification marking is required (see
5.3.1).
When this specification is used in an
6.2.2 Data requirements.
acquisition which incorporate a DD Form 1423, Contract Data Requirements List
(CDRL) the data requirements identified below shall be developed as specified
by an approved Data Item description (DD Form 1664) and delivered in
accordance with the approved CDRL incorporated into the contract. When the
provisions of DAR 7-104.9 (N) (2) are invoked and the DD Form 1423 is not
used, the data specified below shall be delivered by the contractor in
28
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |