 |
|||
|
Page Title:
Regulations pertaining to radioactive devices |
|
||
| ||||||||||
|
|  MIL-H-45984B
(AR)
3.6 Identification and insturctional marking.
Identification and instructional markings shall be applied in
accordance with Drawing K120 08000. Other marking, including
application of part numbers and instructional marking, shall be
as specified on the applicable drawings and in accordance with
MIL-STD-13. Serial number shall be furnished by the procuring
activity (see 6.2).
3.7 Regulations pertaining to radioactive devices.
Marking, Identification, handling and shipping of radioactive
devices shall be in accordance with MIL-STD-1458.
3.8 Workmanship. Workmanship and finish shall be in
accordance with the highest grade practice used in manufacturing
military weapons. Finished items and parts shall not exhibit
poor material and processing such as seams, laps, laminations,
cracks, visible steps, sharp edges, nicks, stratches, burrs.
deformations and missing operations which may affect
serviceability, functioning, operation, appearance or Safety.
Fins and other extraneous metal shall be removed from cast or
forged parts. Hammering to shape, salvage operations (including
repair by welding) or other similar practices shall not be
permitted without prior approval of the contracting officer.
4.
QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise
specified in the contract, the contractor is responsible for the
performance of all inspection requirements as specified herein.
Except as otherwise specified in the contract, the contractor
may use his own or any other facilities suitable for the
performance of the inspection requirements specified herein,
unless disapproved by the Government. The Government reserves
the right to perform any of the inspections set forth in the
specification where such inspections are deemed necessary to
assure supplies and services conform to prescribed requirements.
4.1.1 The contractor shall perform, as a minimum,
inspections in accordance with the specifications, quality
assurance provisions, MIL-W-63150 and such documents as
specified in LQ12008000, and the contract. These minimum
inspections shall not be construed as relieving the contractor
of his responsibilities under terms of the contract to furnish
the Government with items complying with and conforming to the
requirements of the contract, drawings and specifications.
4.2 Quality assurance terms and definitions. Quality
assurance terms and definitions used herein are in accordance
with MIL-STD-109.
10
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals