|
| MIL-H-85042A(AS)
6.2.1 Contract or purchase order provision. Contracts or orders shall
specify the following provision for first article inspection.
6.2.1.1 First article. When a first article is required for inspection and
approval (see 3.1, 4.3.6.2 and 6.4), the contract or purchase order shall
specify the following provision for first article inspection. When a
contractor is in continuous production of hooks from contract to contract,
consideration should be given to waive the first article inspections. It
inspection is required, indicate:
a.
If first article inspections are conducted at the contractor's plant
or a government approved laboratory, an inspection report shall be
forwarded to the procuring activity for verification,
b.
That the approval of first article samples or the waiving of the
first article inspection shall not relieve the contractor of his
obligation to fulfill all other requirements of the specification and
contract.
6.3 Contract data requirements. When this specification is used in an
acquisition which incorporates a DD Form 1423, Contract Data Requirements List
(CDRL), the data requirements identified below shall be developed as specified
by an approved Data Item Description (DD Form 1664) and delivered in
accordance with the approved CDRL incorporated into the contract. When the
provisions of DAR 7-104.9 (n) (2) are invoked and the DD Form 1423 is not
used, the data specified below shall be delivered by the contractor in
accordance with the contract or purchase order requirements. Deliverable data
required by this specification is cited in the following paragraphs.
Paragraph
Data Requirement
Applicable DID
4.3
First Article
DI-T-5329 - Inspection
Inspection Reports
Test Reports
Quality Conformance
4.4
DI-T-5329 - Inspection
Inspection Reports
Test Reports
-
(Data item descriptions related to this specification, and identified in
section 6 will be approved and listed as such in DoD 5000.19L., Vol. II,
AMSDL. Copies of data item ascriptions required by the contractors in
connection with specific acquisition functions should be obtained from the
Naval Publications and Forms Center or as directed by the contracting officer.)
6.4 Quality assurance definitions.
Definitions for quality assurance terms
are in accordance with MIL-STD-109.
11
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |