 |
|||
|
Page Title:
Inspection equipment list codes |
|
||
| ||||||||||
|
| MIL-I-12822C(MU)
6. NOTES
6.1 Ordering data. - Procurement documents shall specify
the following:
a. Title, number and date of this specification.
b.
Data cards. - Data cards shall be prepared for each
lot In accordance with the information specified In Standard
MIL-STD-1167.
6.2 Inspeciton code numbers. - The five digit code numbers
assigned to the inspections herein are to facilitate future data
collection and analysis by the Government.
6.3 Inspecion equipment. - The contractor shall design
inspection equipment as required by the referenced inspection
Equipment Lists (EL) in accordance with the instructions of
paragraphs 6.3.1 through 6.3.5.
6.3.1 Inspection equipment lists. - Inspection equipment
lists indicate the availability of inspection equipment designs
by showing in the "number" column of the list of Inspection
equipment (Form SMUPA 1010) the numbers of drawings or Federal
Stock numbers of existing equipment designs, or codes as indi-
cated in paragraph 6.3.2. Design action required of the con-
tractor is described in paragraphs 6.3.3 and 6.3.4. The con-
tractor will be required to prepare detailed drawings In accor-
dance with 6.3.4 for all the equipment coded as "Contractor
Design" in the number column. These contractor designs must be
approved by the Government prior to fabrication or procuring of
the equipment. Designs shall be submitted for approval as
specified in 6.3.5.
6.3.2 Inspection equipment list codes. - The inspection
equipment as defined in 6.3.3 and 6.3.4 will be designated in
the EL by the following codes:
CD - Contractor design on controlled contractor format
and/or commercial equipment.
MU - Army design, mandatory for use.
6.3.3 Army designs. - Army designs are reflected on de-
tailed drawings which completely depict all the information
necessary for the fabrication of the item of inspection equip-
ment. The contractor need provide no design when an Army de-
sign is listed for an item of inspection equipment. Army de-
signs fall into two basic classifications; mandatory (designated
"MU") and non-mandatory (indicated by drawing or Federal Stock
Number). When an inspection equipment list references manda-
tory Army designs, the contractor shall comply-with, and use.
12
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals