|
| MIL-I-24739A(SH)
5.2.2 Level B. Inflation assemblies, preserved as specified in 5.1, shall be packed in fiberboard
Closure,
containers conforming to PPP-B-636, Class weather-resistant, style optional.
waterproofing and reinforcing shall be in accordance with the container specification.
5.23 Level C. Inflation assemblies, preserved as specified in 5.1, shall be packed in fiberboard
containers conforming to PPP-B-636, Class Domestic, Style optional. Closure shall be in
accordance with the applicable container specification.
5.2.4 Commercial. Ten inflator assemblies shall be packed in accordance with ASTM D3951.
5.3 Marking.
5.3.1 Standard marking. In addition to any special or other identification marking required
by the contract (see 6.2), each unit, supplementary, intermediate, and exterior container shall be
marked in accordance with MIL-STD-129. The complete military or contractors type or part
number, as applicable (including the Commercial and Government Entity Code (CAGE Code),
shall be marked on all units, supplementary and intermediate packs in accordance with the
identification marking provisions of MIL-STD-129.
5.3.2 Special marking. As specified for hazardous materials in MIL-STD-129, Appendix E.
6.
NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is
not mandatory.)
6.1 Intended Use The Automatic/Manual Inflation Assembly covered by this specification is
intended for use on various life preservers used aboard ships. It is not for use by aircrew.
6.2 Acquisition requirements. Acquisition documents should specify the following:
Title number, and date of this specification
a.
Issue of DODISS to be cited in the solicitation, and if required, the specific issue of
b.
individual documents referenced (see 2.1.1 and 2.2)
When first article is required (see 3.1 and 4.3)
c.
d.
National stock number and quantity
Serial numbers to be assigned by the manufacturer (see 3.20)
e.
First article inspection may be waived (see 43)
f.
17
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |