Sampling Procedures and Tables for Inspection
Quality Assurance Terms and Definitions
Finishing of Metal and Wood Surfaces
Test Methods for Electronic and Electrical
U.S. Army Munitions Command
Invertex, Power, Static: 10516412
PACKAGING DATA SHEET
Packaging of Inverter, Power, Static: 10516412
(Copies of specifications, standards, and drawings required by suppliers
in connection with specific procurement functions should be obtained from the
procuring activity or as directed by the contracting officer.)
3.1 Qualification. - The Inverter, Power, Static: 10516412 furnished under
this specification shall be a product which has been tested and passed the
qualification tests specified herein, and has been listed on or approved for listing
on the applicable qualified products list (see 6.3).
3.2 Fabrication. - The inverter shall be completely transistorized and manufac -
tured in accordance with Drawing D10516412 and drawings pertaining thereto.
3.2.1 Inclosure. - The enclosure shall be made of metal capable of
withstanding the requirements of this specification. The inclosure shall be
finished in accordance with Standard MIL-STD-171, System 20,8. The color
shall be lusterless black, No. 37038 as specified in Standard Fed-STD-595.
The dried finish shall show no running or color separation and shall present a
smooth lusterless finish with no evidence of bare spots.
3.2.2 Circuit components. - The circuitry shall employ standard commercially
available components wherever practical. Special components if used, shall be
capable of fabrication by mass production methods.