|
| ![]() INCH-POUND
MIL-I-60231B(OS)
26 January 1995
SUPERSEDING
MIL-I-60231A
26 April 1974
MILITARY SPECIFICATION
IGNITION ELEMENT, ELECTRIC, M55 ASSEMBLY
This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is
available for use all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for the M55 Ignition Element Assembly (see 6.1).
2. APPLICABLE DOCUMENTS
2.1 Government documents.
2.1.1 Specifications and standards. The following specifications and standards form a part of this
document to the extent specified herein. Unless otherwise specified, the issues of these documents are those
listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and
supplements thereto, cited in the solicitation (see 6.2).
SPECIFICATIONS
MILITARY
MIL-A-2550
Ammunition, General Specification for
STANDARDS
MILITARY
MIL-STD-105
Sampling Procedures and Tables for Inspection by Attributes
MIL-STD-109
Quality Assurance Terms and Definitions
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in
improving this document should be addressed to: Commander, Indian Head Division, Naval Surface Warfare Center,
Standardization Branch (Code 8420), 101 Strauss Avenue, Indian Head, MD 20640-5035, by using the self
addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document
or by letter.
AMSC N/A
FSC 1377
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |