Supply and maintenance

Page Title: Supply and maintenance
Back | Up | Next

Web
www.tpub.com

Information Categories

....

ML-I -60476A(MI )

4.3.3.6 Igniter Charge Weight Test (see 3.1.1) - Major Defect-

Code No. 08001. Two samples per 2 hours of igniter production shall

be tested for the proper weight of charge as specified in 4.4.6 (prior

to canning) using equipment in accordance with 4.3.4. Any one weight

not within tolerance limits specified shall cause the preceding 2 hours

production to be rejected.

4.3.3.7 Igniter Charge Composition Test (see dwg. 457784) Major defect -

Code No. 09001. Two samples per 8 hours of igniter production shall

tested for the proper composition of the charge, as specified in 4.4.7

using equipment in accordance with 4.3.4. Any percentage exceeding

those specified shall cause the preceeding 8 hours production to be

rejected.

4.3,3.8 Moisture content determination, Two sample igniters from

each four hours of production shall be tested for moisture content as

specified in 3,1.2. The test shall be performed as specified in 4.4.8.

Any igniter found to have black powder with excessive moisture will cause

rejection of all igniters manufactured since the last test sample having

proper moisture content.

4.3.4 Inspection equipment. The contractor shall design inspection

equipment in accordance with instructions in 6,3.

4.3,4.1 Government rights to documentation. Inspection equipment

drawings provided and revised in accordance with the requirements of this

specification may be used by DoD activities for design, procurement,

manufacture, testing, evaluation, production and receiving inspection,

overhaul, shipping, storage, identification of stock, ordering and

storage of replacement parts, inspection of items at overhaul, general

maintenance of equipment, construction, survey and wherever inspection

equipment drawings are needed,

4.3.4.2 Supply and maintenance. Supply and maintenance of the

inspection equipment shall be in accordance with MIL-I-45607.

4.3.4.3 Government use of contractor's inspection equipment.

The contractor shall make availa to the Government all inspection

equipment necessary for determining conformance with contract requirements.

Personnel for operating the equipment and verification of its accuracy shall

be supplied by the contractor for the performance of examination or test by

the Government.

4.4 Test methods and procedures

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business