 |
|||
|
|
|||
| ||||||||||
|
|  MIL-I-60513A
3.8.2 Misfires. There shall be no misfires.
3.8.3 Mechanical failures. The initiator shall function without mechanical failure (see
6.4.2).
TABLE I. Pressure values.
Pressure (psig)
Delay time, seconds
Minimum
Maximum
Temperature ( F)
(see 6.4.1)
60 to 70
1300
2200
3.5 + 0.7,
0.8
65 to 75
1300
2200
3.0 0.3
195 to 205
1300
2500
2.700 0.006
3.9 Workmanship. Initiators shall be free of cracks, splits, or other defects which might
prevent proper mating with connecting parts or proper functioning of the device.
3.9.1 Metal defects. All components shall be free from cracks, splits, cold shuts,
inclusions, porosity, or any similar defect.
3.9.2 Burr. No part shall have a burr which might interfere with the assembly or function of
the item or which might be injurious to personnel handling the item.
3.9.3 Foreign matter. No part or assembly shall contain chips, dirt, grease, rust, corrosion,
or other foreign matter.
4. QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise specified in the contract or purchase
order, the contractor is responsible for the performance of all inspection requirements
(examinations and tests) as specified herein. Except as otherwise specified in the contract or
purchase order, the contractor may use his own or any other facilities suitable for the
performance of the inspection requirements specified herein, unless disapproved by the
Government. The Government reserves the right to perform any of the inspections set forth in this
specification where such inspections are deemed necessary to ensure supplies and services conform
to prescribed requirements (see 6.2).
4.1.1 Responsibility for compliance. All items shall meet all requirements of sections 3 and
5. The inspection set forth in this specification shall become a part of the contractor's overall
inspection system or quality program. The absence of any inspection requirements in the
4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals