 |
|||
|
|
|||
| ||||||||||
|
|  MIL-J-7093A
(Weps)
Ordering Data. - Procurement documents should specify, but not
6.2
be limited to:
(a) Title, number, and date of this specification
(b) Testing activity designated to evaluate the preproduction
sample.
(c) Invocation of specification MIL-Q-9858.
Definitions. - The definitions shall be in accordance with MIL-STD-292
6.3
and as specified herein.
Action Time. - Action time shall be measured on the thrust time curve
6.3.1
(see sample, figure 2 between the point at which the initial rise of the curve
crosses the 250 pound thrust ordinate and the point at which the final decline of the
curve cresses the 250 pound thrust ordinate.
Total Impulse. - Total impulse is the integral of the time-thrust curve
6.3.2
between the point used in 6.3.1 to establish thrust duration.
Ignition Delay. - Ignition delay is defined as the elapsed time between
6.3.3
switch operation and the attainment of a thrust value of 250 pounds.
Value Engineering. - Manufacturers of material covered by this
6.4
specification are encouraged to submit value engineering suggestions to the procuring
activity in an effort to reduce cost.
Request for Waiver or Deviation. - Request for deviation from this
6.5
specification, applicable drawings, specifications, materials, or processes shall
be forwarded to the procuring activity prior to manufacture of the affected item or
items. All deviations shall be limited to the contract under which they were granted.
Request for waiver from this specification, applicable drawings, specifications,
materials, or processes shall be forwarded to the procuring activity. All waivers
shall be limited to the specific item for which they are granted. Waiver requests
shall contain the following information:
( a ) Nomenclature, part number, serial number, lot number, contract
number.
( b ) Exact nature of the defect invoved or proposed change and
available documentation references.
( c ) Reason for occurrence of defect or proposed change.
( d ) Quantity of items involved.
( e ) Remedial action taken to prevent recurrence of this defect.
( f ) Urgency for action on request and effect on production.
( g ) Cost reduction involved in approval of waiver or deviation.
( h ) Otrher pertinent factors.
14
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals