 |
|||
|
|
|||
| ||||||||||
|
|  MIL-K-48196(MU)
Method of Inspection
Characteristics
Categories
Minor
201 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..Visual
202 Workmanship (see 3. 3) . . . . . . . . . . . . . . . . . . . . .Visual-Manual
4.3.3 Testinq. Not applicable
4.3.4 Acceptance inspection equipment.
4.3.4.1 Critical and major characteristics and tests.
Inspection and testing shall be performed with the acceptance
inspection equipment, operating instructions, and calibration
instructions specified on the Equipment Lists (EL) (See
EL-10522823). When either of the conditions listed below
exist, the contractor shall design required equipment or
specify suitable commercial equipment and obtain approval
prior to use on the contract.
a. my deviation from equipment or procedures
specified on the EL is desired (see 6.3) .
b. The code "CD" is listed in the "Part or
Identifying Number" column of the EL (see 6.1.2).
4.3.4.2 Minor characteristics and tests. Acceptance
inspection equipment for minor characteristics is not
specified on ELs. The acceptance inspection equipment,
operating instructions and calibration instructions used
by the contractor for minor classification inspection shall
be approved by the Government representative authorized by
the procuring agency.
4.4 Test methods. Not applicable
PREPARATION FOR DELIVERY
5.
5.1 Production items.
5.1.1 Preservation and packaging. Preservation and
packaging shall be level A or C as specified (see 6.1).
5.1.1.1 Level A. The key shall be preserved
and packaged in accordance with instructions contained in
MIL-STD-1169 (MU).
5.1.1.2 Level C. The key shall be preserved
and packaged in accordance with instructions contained in
MIL-STD-1169(MU).
5.1.2 packing.
5.1.2.1 Levels A and C. The key shall be
packed in accordance with the applicable instructions con-
tained in MIL-STD-1169(MU).
6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals