 |
|||
|
Page Title:
Other Government documents, drawings, and publications |
|
||
| ||||||||||
|
|  MIL-L-45403D
2.1.2 Other Government documents, drawings, and publications. The
following other Government documents, drawings and publications form a part of
this specification to the extent specified herein.
DRAWINGS
U.S. ARMY ARMAMENT RESEARCH AND DEVELOPMENT COMMAND
D10521997
-
Case
Cartridge, Dummy, 7.62MM
C11836917
-
C10522688
-
Dummy Cartridge, 7.62MM, M172, Inert Loaded
F7268389
-
Link, Cartridge, Metallic Belt, 7.62MM, M13
P7268389
-
Packaging Data Sheet for Link, Metallic
Belt, 7.62MM, M13
2.2 Other publications.
IEL 7268389 -
Index of Inspection Equipment List
AMERICAN SOCIETY FOR TESTING AND MATERIALS
ASTM E 18 -
Tests for Rockwell Hardness of Metallic
Materials
(Copies of specifications, standards, handbooks, drawings, and
publications required by manufacturers in connection with specific acquisition
functions should be obtained from the contracting activity or as directed by
the Contracting Officer.)
Order of precedence. In the event of a conflict between the text of this
specification and the references cited herein, the text of this specification
shall take precedence.
3. REQUIREMENTS
3.1 First article. Requirements for submission of first article shall be
as specified in the contract (see 6.1). Unless otherwise specified (see 6.1)
the first article shall include the pilot pack (see 5.1).
3.2 Materials, construction and design. Links shall conform to the
materials, construction and design requirements specified herein, on Drawing
F7268389 and in MIL-W-13855.
3.2.1 Belt strength. A belt consisting of six links and five 7.62MM
dummy test cartridges, (Dwg No. 11836917) shall be capable of withstanding a
tensile load of 55 pounds (lbs.) without separation. Testing shall be as
specified in 4.5.3.
3.2.2 Cartridge stripping
The force reqired to strip a NATO approved
7.62MM cartridge case from a link using a centrally applied load without
impact shall be not less than 8.5 lbs. and not more than 18 lbs. Links shall
assemble and disassemble without shaving resulting in removal of metal from
the cartridge cases. Testing shall be as specified in 4.5.4.
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals