 |
|||
|
Page Title:
Quality assurance terms and definitions |
|
||
| ||||||||||
|
|  MIL-L-45522A
3.4 Marking.
Linker-delinkers shall be marked in accordance with
MIL-W-13855.
Workmanship shall be in accordance with
3.5 Workmanship.
MIL-W-13855.
4. QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise specified in
the contract or purchase order, the supplier is responsible for the per-
formance of all inspection requirements specified herein. Except as
otherwise specified in the contract or order, the supplier may use his
own or any other facilities suitable for the performance of the inspection
requirements specified herein unless disapproved by the Government. The
Government reserves the right to perform any of the inspections set forth
in the specification where such inspections are deemed necessary to assure
supplies and services conform to prescribed requirements.
4.2 Quality assurance terms and definitions. Quality Assurance terms
and definitions used herein are in accordance with MIL-STD-109.
*
4.3 Classification of inspection. The inspection requirements
specified herein are classified as follows:
First article inspection (see 4.4).
Quality conformance inspection (see 4.5).
*
4.4 First article inspection. The first article (initial production
unit(s) shall be submitted for inspection in accordance with the contract
requirement (see 6.1). The first article shall be representative of the
production processes to be used during quantity production. The first
article shall be subjected to the quality conformance inspection speci-
fied herein, and such other inspection as is necessary to determine
compliance with the requirements of the contract.
4.5 Quality conformance inspection.
4.5.1 Inspection lot. Unless otherwise specified, the formation,
size and presentation of inspection lots shall be in accordance with
MIL-STD-105. Inspection lots shall be within the limitations of
MIL-W-13855. Linker-delinkers shall be assembled from component parts
that have met all inspection requirements specified herein.
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals