|
| MIL-L-5522A
4.6 Test methods.
4.6.1 Functioning test. The linker-delinker shall be tested
using Government standard 7.62mm dummy-inert cartridge and Ml3 links
(see 6.1). With the handle stud in the forward camway of the brat'k.et
and the handle in the rearward position, a belt. of 21 dummy cartridges
shall be positioned with the links against the forward lugs of the
cartridge guides and the loop openings facing upwards. The heads of
the cartridges shall be facing the cartridge rammer with the outlet
noses of the cartridges facing forward. The handle shall be manually
brought to the f orward position to strip the cartridges from the flexible
belt. The handle shall be returned to the rearward position. The rammer
shall be repositioned rearward so that the handle stud is in the rear-
ward camway of the bracket. The 21 dummy- inert cartridges shall then be
placed so that the heads of the cartridges are facing the cartridge
rammer with the bullet noses of the cartridges entering the links. The
handle shall be brought fully forward to force the cartridges into the
links to form a flexible belt. The handle shall then be returned to
the rearward position and the flexible belt lifted out and examined For
completeness of linking. The linker-delinker may be secured for the
above test.
PREPARATION FOR DELIVERY
5.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |