 |
|||
|
Page Title:
|
|
||
| ||||||||||
|
|  MIL-L-45589
4.5.4 Interchange of parts.
4.5.4.1 In plant.
4.5.4.1.1 Launchers. Launchers shall be tested for interchange
of parts (see 3.9.13) by disassembling and then reassembling parts
using the parts and prearranged system prescribed below. Interchange
of parts shall be accomplished by divising the parts of each launcher
into 10 groups of nonmating parts as shown below and distributing the
groups into 10 different trays until each tray contains a complete launcher.
Groups of parts from launcher number 1 shall be taken in order and placed
in trays 1 through 10: groups of parts from launcher number 2 shall be
taken in order and placed in trays 2 through 10 to 1; groups of parts
from launcher number 3 shall be taken in order and placed in trays 3 through
10 to 2, etc. Commercial parts such as screws, nuts, washers, and pins
shall be placed in the same tray as their mating or associate part.
Any commercial part rendered unserviceable by disassembly shall be re-
placed without penalty to the interchangeability test. The launchers
shall be reassembled using only those parts which are in the same tray.
Groups of nonmating parts
Group II
Group I
Base$ frame (7791012)
Actuator, safety (7790601)
Extractor (7791529)
Aperature, sight (7791011)
Latch (7790636)
Arm, cocking (7791353)
Retainer, aperature (7791023)
Sear (779649)
Swivel, sling assembly (6147721)
Spring, helical, torsion (7791558)
Group IV
Group III
Bushing, hammer spring (7790606)
Base, sight (7791013 )
Carrier, aperture (7791014 )
Lever, cocking (7790623)
Lock, latch (7790624)
Safety (7790644)
Screw, machine, flat countersunk
Sight, front (7791568)
head (7791227)
Spring, helical, compression
Spring, helical, comression
(used with firing pin) (7790656)
(used with extractor (7790655)
Stock assembly (7792767 or 11010343 )
Group VI
Group V
Barrel (7791569)
Frame assembly (7791015)
Key, windage screw (7791020)
Hammer (7790622)
Screw, self-locking (7790642)
Screw (used with stock swivel
Spring, helical, compression (used
assembly)(6146873 or 11010346)
Screw, sight base (7790647)
with indexing plunger)(7791028)
16
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals