 |
|||
|
Page Title:
Launcher,Grenade, 40 MM: Detachable M203 |
|
||
| ||||||||||
|
|  MIL-L-45935A
AMENDMENT 3
29 March 1991
SUPERSEDING
AMENDMENT 2
29 June 1987
MILITARY SPECIFICATION
LAUNCHER, GRENADE, 40MM: DETACHABLE M203
This Amendment forms a part of Military Specification MIL-
L-45935A, dated 5 September 1974, and is approved for use
by all Departments and Agencies of the Department of Defense.
PAGE 1
1.1, Change "the M16 and M16A1, 5.56mm Rifle" to "the M16 and
M16A1 or M16A2, 5.56mm Rifle".
*
2.1, Under Standards Add:
"MIL-STD-1189
-Standard Department of Defense
Bar Code Symbology"
PAGE 2
Delete 3.2.2.1 and Substitute:
"3.2.2.1 Pump actuation. The barrel assembly shall be
capable of pump actuation when the barrel latch is depressed.
The barrel assembly shall be capable of forward and rearward
movement over its full range of travel. The maximum force
required to move the unloaded barrel assembly from the unlocked
position to the maximum forward open position and returned to
the close locked position shall not exceed 14 pounds. Under
loaded conditions using the 40mm (functional test) plug, P/N
12937951, the maximum forces shall not exceed 28 pounds.
Testing shall be as specified in 4.5.3.2."
PAGE 3
*
Delete 3.2.2.4 and Substitute:
"3.2.2.4 Cartridge retainer. The cartridge retainer clips
shall be capable of deflection through their full range of
travel without binding or permanent deformation. The cartridge
retainer shall be capable of holding a fully inserted 40mm plug,
P/N 12937951, within the barrel chamber, when the launcher is
held in the vertical position with the muzzle upward and the
barrel opened. to the full open position."
AMSC N/A
FSC 1010
1 of 7
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals