|
| MIL-L-48063A(MI)
a.
One (1) in accordance with high temperature and low temperature.
b. One (1) in accordance with high temperature and shock.
One (1) in accordance with low temperature and vibration.
c.
d.
One (1) in accordance with shock and static firing.
One (1) in accordance with vibration and static firing.
e.
When 8 launchers are selected, the three additional launchers will be tested
as follows:
f. One (1) in accordance with shock and vibration.
One (1) in accordance with shock and static firing.
g.
h. One (1) in accordance with vibration and static firing.
Tests shall be conducted as specified in 4.4.14 using equipment in accordance
with 4.3.4.
Additional launcher environmental test for first article
4.3.3.16
Major defects
(see 3.4.11).
a.
Salt fog
b. Static load
Rough handling
c.
d. Flight firing
These tests shall be conducted as specified in 4.4.14 using equipment in
accordance with 4.3.4.
4.3.4 Inspection equipment. Equipment tabulation number ET-356AS1OO
identifies the inspection equipment required to perform the examinations
and tests prescribed in this section. The contracting officer retains the
approval authority on inspection equipment.
4.3.4.1 Government rights to documentation. Inspection equipment
drawings and lists provided and revised in accordance with the requirements
of the ET may be used by DOD activities for design, procurement, manufacture,
testing, evaluation, production and receiving inspection, overhaul, shipping,
storage, identification of stock, ordering and storage of replacement parts,
inspection of items at overhaul, general maintenance of equipment,
construction, survey and whenever inspection equipment drawings are needed.
4.4 Test methods.
24
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |