|
| MIL-L-51513(EA)
relieve the contractor of the responsibility of assuring that all products or
supplies submitted to the Government for acceptance comply with all require-
ments of the contract. Sampling in quality conformance does not authorize sub-
mission of known defective material, either indicated or actual, nor does it
commit the Government to acceptance of defective material.
4.1.2 Objective evidence. The contractor shall provide objective evidence
acceptable to the contracting officer that the requirements of 3.1 and section
5 for which specific inspection has not been provided in this specification
have been satisfied.
4.2 Classification of inspection.
(a) Preproduction inspection ( see 4.3).
(b) Quality conformance inspection ( see 4.4).
4.3 Preproduction inspection
4.3.1 Lot. A preproduction lot of 5 launchers shall be produced using the
same methods, materials, equipment and processes as will be used in regular pro-
duction.
4.3.2 For examination and tests. The launchers shall be examined and tested
in accordance with the classification of defects (4.4.3.2). The AQLs do not
apply.
4.3.3 Acceptance/rejection criteria. The launchers shall comply with the
examinations and test specified in 4.3.2 to be acceptable. The contractor
shall obtain written approval from the contracting officer prior to proceeding
with regular production
4.4 Quality conformance inspection,
4 . 4 . 1 L o t t i n g . A lot shall consist of like components or subassemblies of
one interfix number produced by one manufacturer, from the same materials and
under essentially the same manufacturing conditions.
4.4.2 Sampling.
Sampling shall be conducted in accordance with table III.
4.4.3 Inspection procedure.
4.4.3.1 For examination and test. Sample launchers and components shall be
examined and tested in accordance with the classification of defects and table
III.
4 . 4 . 3 . 2 F o r c r i t i c a l c h a r a c t e r i s t i c s . E a c h discharger in the lot shall be
tested for its critical characteristic listed in the classification of defects.
F a i l u r e of any one discharger shall be cause for rejection of the lot repre-
sented.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |