 |
|||
|
Page Title:
Submission of inspection equipment for design approvals |
|
||
| ||||||||||
|
|  MIL-L-63532C(AR)
Each sample belt or container shall be
Functioning.
4.5.11
fired using
an M249 machine gun in bursts of 5-7 rounds at a rate
per minute. Weapons shall be cooled to ambient
of 85 shots
temperature
after each 200 rounds fired.
*
PACKAGING
5.
5.1 Preservation and packaging. The links shall be preserved
and packaged for shipment in accordance with P9347167 (Carton
Pack) except when Bulk Packing is required P9381501 will be
utilized for the levels as specified in the contract (see 6.1).
Packing. The links shall be packed in accordance with
5.2
P9347167
(Carton Pack) except when Bulk Packing is required
P9381501
will be utilized for the levels as specified in the
contract
(see 6.1).
5.3 Marking. Marking shall be in accordance with dwg.
9344346 and Packaging Data Sheets P9347167. When Bulk Packing is
specified, P9381501 will be utilized.
NOTES
6.
*
The links governed by this specification
6.1 Intended use.
are intended for use with M855 and M856 cartridges.
6.2 Ordering data.
See MIL-A-48078.
6.3 Submission of inspection equipment for design approvals.
Submit designs as required to Commander, US Army
See MIL-A-48078.
DRDAR-QAF-I,
Armament Research and Development Command, ATTN:
Dover, NJ 07801.
*
The margins of this
6.4 Changes from previous issues.
specification are marked with asterisks to indicate where changes
(additions, modifications, corrections, deletions) from the
previous issue were made. This was done as a convenience only and
the Government assumes no liability whatsoever for any
inaccuracies in these notations.
Bidders and contractors are
cautioned to evaluate the requirements of this document based on
the entire content irrespective of the marginal notations and
relationship to the previous issue.
13
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals