 |
|||
|
Page Title:
Lubricants, Water Displacing, Synthetic |
|
||
| ||||||||||
|
|  INCH-POUND
MILL87177A
9 February 1990
SUPERSEDING
MILL87177
9 September l983
MILITARY SPECIFICATION
LUBRICANTS, WATER DISPLACING, SYNTHETIC
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers synthetic, water displacing lubricant, compounds
which may be applied from gas pressurized containers, or by dipping or brushing.
1.2 Classification. The compound shall be furnished in the specified types and grades (see
6.2).
1.2.1 Types. The compound types shall consist of the following:
a. Type I: Pressurized spray container (for spray application).
b. Type II: Bulk form.
1.2.2 Grades. The compound grades shall be designated as follows:
a. Grade A: Lubricant, water displacing, synthetic.
b. Grade B: Lubricant, water displacing, synthetic, with added
corrosion inhibitor.
c. Grade C: Lubricant, dry spray, synthetic.
2.1 Government documents
2.1.1 Specifications and standards. The following specifications and standards form a
part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those listed in the issue of the Department of Defense
Index of Specifications and Standards (DODISS) and supplement thereto, cited in the
solicitation (see 6.2)
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may
be of use in improving this document should be addressed to: ASD/ENES, WrightPatterson AFB
OH 454336503 by using the selfaddressed Standardization Document Improvement Proposal
(DD Form 1426) appearing at the end of this document or by letter.
AMSC N/A
FSC 9150
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals