 |
|||
|
|
|||
| ||||||||||
|
|  MIL-M-38510/118B
TABLE II. Electrical test requirements.
MIL-PRF-38535
Subgroups (see table III)
test requirements
Class S
Class B
devices
devices
Interim electrical parameters
1
1
Final electrical test parameters 1/
1,2,3,4
1,2,3,4
Group A test requirements
1,2,3,4,7
1,2,3,4,7
Group B electrical test parameters
1,2,3, and
N/A
when using the method 5005 QCI
table IV delta
option
limits
Group C electrical parameters
1,2,3, and
1 and
table IV delta
table IV delta
limits
limits
Additional electrical subgroups
Not applicable
None
for group C periodic inspections
Group D end point electrical
1,2,3
1
parameters
1/ PDA applies to subgroup 1.
4.4.4 Group D inspection. Group D inspection shall be in accordance with table V of MIL-PRF-38535 and as follows:
a.
End point electrical parameters shall be as specified in table II herein.
b.
Constant acceleration (method 2001 of MIL-STD-883); test condition B shall be used for case Y.
4.5 Methods of inspection. Methods of inspection shall be as specified and as follows.
4.5.1 Voltage and current. All voltage values given are referenced to the designated return sense line. Currents given
are conventional current and positive when flowing into the referenced terminal.
4.5.2 Life test and burn-in cool down procedure. When devices are measured at +25C following application of the
operating life or burn-in condition, they shall be cooled to room temperature prior to removal of the bias.
4.5.3 Inspection of packaging. The sampling and inspection of the preservation packaging, packing, and container
marking shall be in accordance with the requirements of MIL-PRF-38535.
5. PACKAGING
5.1 Packaging requirements. For acquisition purposes, the packaging requirements shall be as specified in the contract
or order (see 6.2). When packaging of materiel is to be performed by DoD or in-house contractor personnel, these
personnel need to contact the responsible packaging activity to ascertain packaging requirements. Packaging requirements
are maintained by the Inventory Control Point's packaging activity within the Military Service or Defense Agency, or within
the military's service system command. Packaging data retrieval is available from the managing Military Department's or
Defense Agency's automated packaging files, CD-ROM products, or by contacting the responsible packaging activity.
15
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals