 |
|||
|
Page Title:
Figure 2. Case outline Y (device type 02)-cont. |
|
||
| ||||||||||
|
|  MIL-M-38510/118B
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only and are based upon 1.00 inch = 25.4 mm.
3. (Four leads) φb applies between L1 and .500 (12.70 mm) from the seating plane.
Diameter is uncontrolled in L1 and beyond .500 (12.70 mm) from the seating plane.
4.
Four leads.
5.
Two holes.
6.
Two holes located at true position within diameter .010 (.25 mm).
7.
Leads having a maximum diameter .043 (1.09 mm) measured in gaging plane .054 (1.37 mm) + .001 (.03 mm) -
.000 (.00 mm) below the seating plane shall be located at true position within diameter .014 (.36mm).
8.
The mounting surface of the header shall be flat to convex within .003 (.08 mm) inside a .930 (23.62 mm)
diameter circle on the center of the header and flat to convex within .006 (.15 mm) overall.
FIGURE 2. Case outline Y (device type 02) Continued.
18
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals