|
| MIL-M-38510/11D
3 March 2005___
SUPERSEDING
MIL-M-38510/11C
19 May 1978
MILITARY SPECIFICATION
MICROCIRCUITS, DIGITAL, TTL, ARITHMETIC LOGIC UNITS/
FUNCTION GENERATORS, MONOLITHIC SILICON
Inactive for new design after 6 September 1996.
This specification is approved for use by all Depart-
ments and Agencies of the Department of Defense.
The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF 38535
1. SCOPE
1.1 Scope. This specification covers the detail requirements for monolithic, silicon, TTL, arithmetic logic units/
function generators. Two product assurance classes and a choice of case outlines and lead finishes are provided for
each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have
been superseded by MIL-PRF-38535, (see 6.4).
1.2 Part or Identifying Number (PIN). The PIN is in accordance with MIL-PRF-38535, and as specified herein.
1.2.1 Device types. The device types are as follows:
Device type
Circuit
01
Arithmetic logic unit/function generator
02
Look-ahead carry generator
1.2.2 Device class. The device class is the product assurance level as defined in MIL-PRF-38535.
1.2.3 Case outlines. The case outlines are as designated in MIL-STD-1835 and as follows:
Outline letter
Descriptive designator
Terminals
Package style
E
GDIP1-T16 or CDIP2-T16
16
Flat pack
F
GDFP2-F16 or CDFP3-F16
16
Flat pack
J
GDIP1-T24 or CDIP2-T24
24
Dual-in-line
K
GDFP2-F24 or CDFP3-F24
24
Flat pack
L
F-7 (24-lead, 3/8" x 1/2", flat pack) 1/
Z
GDFP7-F24 or CDFP8-F24
24
Flat pack
1/ Case outline L (F-7) was removed from MIL-M-38510 in 1981.
Comments, suggestions, or questions on this document should be addressed to: Commander, Defense
Supply Center Columbus, ATTN: DSCC-VAS, P. O. Box 3990, Columbus, OH 43218-3990, or emailed to
bipolar@dscc.dla.mil. Since contact information can change, you may want to verify the currency of this
address information using the ASSIST Online database at http://assist.daps.dla.mil.
AMSC N/A
FSC 5962
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |