|
| ![]() TABLE III. Group A inspection for device type 01 - Continued. 1/
Terminal conditions (Pins not designated may be H ≥ 2.0 V, or L ≤ 0.8 V, or open).
1/
2/
Tests shall be performed in sequence.
3/
Input voltages shown are: A = 2.0 V minimum and B = 0.8 V maximum.
4/
Output voltages shall be either: (a) H = 2.4 V, minimum and L = 0.4 V, maximum when using a high speed checker double comparator; or
(b) H ≥ 1.5 V and L < 1.5 V when using a high speed checker single comparator.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |