 |
|||
|
Page Title:
Table 4. Group C end point electrical parameters. |
|
||
| ||||||||||
|
|  MIL-M-38510/140A
TABLE IV. Group C end point electrical parameters.
Device type
Symbol
Delta 1/
End-point limits
Table III
test no.
Min
Max
Min
Max
Units
-0.5
0.5
-1.0
2.0
LSB
382
01,02
VIO
-0.5
0.5
-2.0
3.0
LSB
03,04,05,06
VIO
-1.0
1.0
-5.5
4.5
LSB
383
All
BZ
-0.1
0.1
-0.225
0.225
%FSR
384
01
AE
-0.1
0.1
-0.35
0.35
%FSR
02
AE
-0.1
0.1
-0.4
0.4
%FSR
03,04,05,06
AE
1/
Delta limits apply to the measured value (see delta limit definition in MIL-PRF-38535).
5. PACKAGING
5.1 Packaging requirements. For acquisition purposes, the packaging requirements shall be as specified in the contract or
order (see 6.2). When actual packaging of materiel is to be performed by DoD personnel, these personnel need to contact the
responsible packaging activity to ascertain requisite packaging requirements. Packaging requirements are maintained by the
Inventory Control Point's packaging activity within the Military Department of Defense Agency, or within the Military Department's
System Command. Packaging data retrieval is available from the managing Military Department's or Defense Agency's
automated packaging files, CD-ROM products, or by contacting the responsible packaging activity.
6. NOTES
6.1 Intended use. Microcircuits conforming to this specification are intended for original equipment design applications and
logistic support of existing equipment.
6.2 Acquisition requirements. Acquisition documents should specify the following:
a.
Title, number, and date of the specification.
b.
PIN and compliance identifier, if applicable (see 1.2).
c.
Requirements for delivery of one copy of the conformance inspection data pertinent to the device
inspection lot to be supplied with each shipment by the device manufacturer, if applicable.
d.
Requirements for certificate of compliance, if applicable.
e.
Requirements for notification of change of product or process to acquiring activity in addition to
notification of the qualifying activity, if applicable.
f.
Requirements for failure analysis (including required test condition of MIL-STD-883, method 5003),
corrective action and reporting of results, if applicable.
g.
Requirements for product assurance options.
h.
Requirements for special carriers, lead lengths, or lead forming, if applicable. These requirements should not
affect the part number. Unless otherwise specified, these requirements will not apply to direct purchase by
or direct shipment to the Government.
i.
Requirements for "JAN" marking.
j.
Packaging requirements (see 5.1).
52
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals