 |
|||
|
Page Title:
Table 2. Electrical test requirements. |
|
||
| ||||||||||
|
|  MIL-M-38510/207E
TABLE II. Electrical test requirements.
Subgroups (see table III)
1/, 2/, 3/
MIL-PRF-38535
test requirements
Class S
Class B
devices
devices
Interim electrical parameters
1
1
Final electrical test parameters
1*, 2, 3, 7*,
1*, 2, 3,
for unprogrammed devices
8
7*, 8
Final electrical test parameters
1*, 2, 3, 7*
1*, 2, 3, 7*,
for programmed devices
8, 9, 10, 11
8, 9,
1, 2, 3, 7, 8,
1, 2, 3, 7, 8
Group A test requirements
9, 10, 11
9, 10, 11
Group B end-point electrical parameters
1, 2, 3, 7, 8,
N/A
when using the method 5005 QCI option
9, 10, 11
Group C end-point electrical
1, 2, 3, 7, 8,
1, 2, 3, 7, 8
parameters
9, 10, 11
Group D test requirements
1, 2, 3, 7, 8
1, 2, 3, 7, 8
1/ * indicates PDA applies to subgroups 1 and 7 (see 4.2c).
2/ Any or all subgroups may be combined when using high-speed testers.
3/ Subgroups 7 and 8 shall consist of verifying the pattern specified.
4.4.2 Group B inspection. Group B inspection shall be in accordance with table II MIL-PRF-38535.
4.4.3 Group C inspection. Group C inspection shall be in accordance with table IV of MIL-PRF-38535 and as
follows:
a. End-point electrical parameters shall be as specified in table II herein.
b. The steady-state life test duration, test condition, and test temperature, or approved alternatives shall
be as specified in the device manufacturer's QM plan in accordance with MIL-PRF-38535. The burn-
in test circuit shall be maintained under document control by the device manufacturer's Technology
Review Board (TRB) in accordance with MIL-PRF-38535 and shall be made available to the acquiring
or preparing activity upon request. The test circuit shall specify the inputs, outputs, biases, and
power dissipation, as applicable, in accordance with the intent specified in test method 1005 of MIL-
STD-883.
c. For qualification inspection, at least 50 percent of the sample selected for testing in subgroup 1 shall
be programmed (see 3.3.2). For quality conformance inspection, the programmability sample (see
4.4.1c) shall be included in the life tests.
4.4.4 Group D inspection. Group D inspection shall be in accordance with table V of MIL-PRF-38535. End-
point electrical parameters shall be as specified in table II herein.
17
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals