 |
|||
|
Page Title:
Recommended operating conditions. |
|
||
| ||||||||||
|
|  MIL-M-38510/21F
1.3 Absolute maximum ratings.
Supply voltage range ......................................................
0 V dc to 8.0 V dc
Input voltage range .........................................................
0 V dc to 6.0 V dc
Storage temperature range ............................................
-65C to +150C
Maximum power dissipation in accordance
with flip-flop (PD) 1/ ..................................................
11 mW dc
Lead temperature (soldering 10 seconds) ......................
300C
Thermal resistance, junction-to-case (θJC)......................
(See MIL-STD-1835)
175C
Junction temperature (TJ ) 2/ ..........................................
1.4 Recommended operating conditions.
Supply voltage (VCC) ....................................................... 4.5 V dc minimum to 5.5 V dc maximum
Minimum high level input voltage (VIH) ........................... 2.0 V dc
Maximum low level input voltage (VIL) ............................ 0.7 V dc, except clock input of
types 01, 02, 03, and 04
Maximum low level input voltage (VIL) ............................ 0.6 V dc, (types 01, 02, 03, and 04)
Normalized fanout (each output) 3/ ................................ 10 maximum
Width of clock pulse ....................................................... ≥ 200 ns
Width of preset pulse ...................................................... ≥ 100 ns
Width of clear pulse ........................................................ ≥ 100 ns
Input setup time:
Device types 02, 03, and 04 ...................................... ≥ Clock pulse width minimum
Device type 01 .......................................................... 100 ns minimum when R, S input data
is complementary
Device type 01 .......................................................... ≥ Clock pulse width, minimum when R, S
input data is not complementary
Device type 05 .......................................................... 50 ns minimum
Input hold time ................................................................ 10 ns minimum
Case operating temperature range (TC ) ......................... -55C to 125C
2.0 APPLICABLE DOCUMENT
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification.
This section does not include documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of this
list, document users are cautioned that they must meet all specified requirements of documents cited in
sections 3, 4, or 5 of this specification, whether or not they are listed.
_______
1/ Must withstand the added PD due to short circuit condition (e.g. IOS) at one output for 5 seconds duration.
2/ Maximum junction temperature should not be exceeded except in accordance with allowable short
duration burn-in screening condition in accordance with MIL-PRF-38535.
3/ Device will fanout in both high and low levels to the specified number of inputs of the same device type
as that being tested.
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals