|
| INCH-POUND
MIL-M-38510/337B
23 January 2004 _
SUPERSEDING
MIL-M-38510/337A
9 August 1983
MILITARY SPECIFICATION
MICROCIRCUITS, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY TTL,
DECODERS, MONOLITHIC SILICON
Reactivated after 23 January 2004 and may be used for either new or existing design acquisition.
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF 38535
1. SCOPE
1.1 Scope. This specification covers the detail requirements for monolithic silicon, advanced Schottky TTL,
decoder microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided
for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have
been superseded by MIL-PRF-38535, (see 6.3).
1.2 Part or Identifying Number (PIN). The PIN is in accordance with MIL-PRF-38535, and as specified herein.
1.2.1 Device types. The device types are as follows:
Circuit
Device type
01
Decoder, 3 of 8, active low outputs with enable inputs
02
Dual decoder, 2 of 4, active low outputs with enable inputs
1.2.2 Device class. The device class is the product assurance level as defined in MIL-PRF-38535.
1.2.3 Case outlines. The case outlines are as designated in MIL-STD-1835 and as follows:
Descriptive designator
Terminals
Package style
Outline letter
E
GDIP1-T16 or CDIP2-T16
16
Dual-in-line
F
GDFP2-F16 or CDFP3-F16
16
Flat pack
X
CQCC2-N20
20
Square leadless chip carrier
2
CQCC1-N20
20
Square leadless chip carrier
Comments, suggestions, or questions on this document should be addressed to: Commander, Defense
Supply Center Columbus, ATTN: DSCC-VAS, 3990 East Broad St., Columbus, OH 43216-5000, or emailed
to bipolar@dscc.dla.mil. Since contact information can change, you may want to verify the currency of this
address information using the ASSIST Online database at www.dodssp.daps.mil.
AMSC N/A
FSC 5962
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |