 |
|||
|
Page Title:
Microcircuits, Digital, Bipolar, Advanced, Schottky TTL, Flip-Flops, Cascadable, Monolithic Silicon |
|
||
| ||||||||||
|
|  INCH-POUND
MIL-M-38510/341F
4 May 2004
SUPERSEDING
MIL-M-38510/341E
28 APRIL 1989
MILITARY SPECIFICATION
MICROCIRCUITS, DIGITAL, BIPOLAR, ADVANCED, SCHOTTKY TTL,
FLIP-FLOPS, CASCADABLE, MONOLITHIC SILICON
Reactivated after 4 May, 2004 and may be used for either new or existing design acquisition.
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF 38535
1. SCOPE
1.1 Scope. This specification covers the detail requirements for monolithic silicon, Advanced Schottky TTL, flip
flop microcircuits. Two product assurance classes and a choice of case outlines/lead finish are provided and are
reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by
MIL-PRF-38535, (see 6.3).
1.2 Part or Identifying Number (PIN). The PIN is in accordance with MIL-PRF-38535, and as specified herein.
1.2.1 Device types. The device types are as follows:
Circuit
Device type
01
Dual D-type positive edge-triggered flip-flop
Dual J K positive edge triggered flip-flop
02
03
Dual JK negative edge-triggered flip-flop
04
Quad D-type positive edge-triggered flip-flop
05
Octal D-type positive edge-triggered flip-flop
with three-state outputs
06
Octal D-type positive edge-triggered flip-flop
with three-state inverted outputs
07
Hex D-type positive edge-triggered flip-flop
08
Parallel D-type positive edge-triggered
register (with enable)
09
Quad parallel D-type positive edge-triggered register (with enable)
10
Octal D-type positive edge-triggered flip-flop
with three-state outputs and bus structured pinouts
11
Octal D-type positive edge-triggered flip-flop
with three-state inverted outputs and bus structured pinouts
1.2.2 Device class. The device class is the product assurance level as defined in MIL-PRF-38535.
Comments, suggestions, or questions on this document should be addressed to: Commander, Defense
Supply Center Columbus, ATTN: DSCC-VAS, 3990 East Broad St., Columbus, OH 43216-5000, or emailed to
bipolar@dscc.dla.mil. Since contact information can change, you may want to verify the currency of this
address information using the ASSIST Online database at www.dodssp.daps.mil.
AMSC N/A
FSC 5962
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals