|
| ![]() INCH-POUND
MIL-M-38510/345C
17 March 2004___
SUPERSEDING
MIL-M-38510/345B
16 December 1987
MILITARY SPECIFICATION
MICROCIRCUITS, DIGITAL, BIPOLAR ADVANCED SCHOTTKY TTL,
EXCLUSIVE OR GATES, MONOLITHIC SILICON
Reactivated after 17 March 2004 and may be used for either new or existing design acquisition.
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF 38535.
1. SCOPE
1.1 Scope. This specification covers the detail requirements for monolithic silicon, Advanced Schottky TTL,
exclusive OR gates microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are
provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-
38510 have been superseded by MIL-PRF-38535, (see 6.3).
1.2 Part or Identifying Number (PIN). The PIN is in accordance with MIL-PRF-38535, and as specified herein.
1.2.1 Device types. The device types are as follows:
Circuit
Device type
01
Quadruple, 2-input exclusive OR gate
1.2.2 Device class. The device class is the product assurance level as defined in MIL-PRF-38535.
1.2.3 Case outlines. The case outlines are as designated in MIL-STD-1835 and as follows:
Descriptive designator
Terminals
Package style
Outline letter
A
GDFP5-F14 or CDFP6-F14
14
Flat pack
B
GDFP4-14
14
Flat pack
C
GDIP1-T14 or CDIP2-T14
14
Dual-in-line
D
GDFP1-F14 or CDFP2-F14
14
Flat pack
X
CQCC2-N20
20
Square leadless chip carrier
2
CQCC1-N20
20
Square leadless chip carrier
Comments, suggestions, or questions on this document should be addressed to: Commander, Defense
Supply Center Columbus, ATTN: DSCC-VAS, 3990 East Broad St., Columbus, OH 43216-5000, or emailed
to bipolar@dscc.dla.mil. Since contact information can change, you may want to verify the currency of this
address information using the ASSIST Online database at www.dodssp.daps.mil.
AMSC N/A
FSC 5962
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |