2 December 2005
13 April 1984
MICROCIRCUITS, DIGITAL, TTL, HIGH SPEED,
AND-OR-INVERT GATES, MONOLITHIC SILICON
Inactive for new design after 13 April 1984.
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF 38535
1.1 Scope. This specification covers the detail requirements for monolithic silicon, TTL, HIGH SPEED, AND-OR-
INVERT logic gating microcircuits. One product assurance class and a choice of case outlines and lead finishes are
provided for each type and are reflected in the complete part number.
1.2 Part or Identifying Number (PIN). The PIN is in accordance with MIL-PRF-38535.
1.2.1 Device types. The device types are as follows:
Expandable dual 2-wide, 2-input AND-OR-INVERT gate
Dual 2-wide, 2-input AND-OR-INVERT gate
Expandable 2-2-2-3 input AND-OR-INVERT gate
2-2-2-3 input AND-OR-INVERT gate
Expandable 2-wide, 4-input AND-OR-INVERT gate
1.2.2 Device class. The device class is the product assurance level as defined in MIL-PRF-38535.
1.2.3 Case outlines. The case outlines are as designated in MIL-STD-1835 and as follows:
GDFP5-F14 or CDFP6-F14
GDIP1-T14 or CDIP2-T14
GDFP1-F14 or CDFP2-F14
Comments, suggestions, or questions on this document should be addressed to: Commander, Defense
Supply Center Columbus, ATTN: DSCC-VAS, P. O. Box 3990, Columbus, OH 43218-3990, or emailed to
email@example.com. Since contact information can change, you may want to verify the currency of this
address information using the ASSIST Online database at http://assist.daps.dla.mil.