|
| INCH POUND
MIL-M-38510/505C
24 JANUARY 2006
SUPERSEDING
MIL-M-38510/505B
7 SEPTEMBER 2005
MILITARY SPECIFICATION
MICROCIRCUITS, DIGITAL, BIPOLAR PROGRAMMABLE LOGIC,
MONOLITHIC SILICON
Inactive for new design after 28 July 1995.
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF 38535.
1. SCOPE
1.1 Scope. This specification covers the detail requirements for monolithic silicon, bipolar, programmable logic
microcircuits which employ titanium tungsten resistors as the fusible link or programming element. Two product
assurance classes (B and S) and a choice of case outlines and lead finishes are provided and are reflected in the
complete part or identifying number (PIN). For this product, the requirements of MIL-M-38510 have been superseded
by MIL-PRF-38535, (see 6.4).
1.2 Part or Identifying Number (PIN). The PIN is in accordance with MIL-PRF-38535, and as specified herein..
1.2.1 Device type. The device type is as follows:
Device type
Circuit
01
20 input 8 output AND-OR invert gate array
02
20 input 8 output registered AND-OR gate array
03
20 input 6 output registered AND-OR gate array
04
20 input 4 output registered AND-OR gate array
1.2.2 Device class. The device class is the product assurance level as defined in MIL-PRF-38535.
1.2.3 Case outline. The case outlines are as designated in MIL-STD-1835 and as follows:
Outline letter
Descriptive designator
Terminals
Package style
L
GDIP3-T24, CDIP4-T24
24
Dual in line
3
CQCC1-N28
28
Square leadless chip carrier
Comments, suggestions, or questions on this document should be addressed to: Commander, Defense
Supply Center Columbus, ATTN: DSCC-VAS, P. O. Box 3990, Columbus, OH 43218-3990, or emailed to
memory@dscc.dla.mil . Since contact information can change, you may want to verify the currency of this
address information using the ASSIST Online database at http://assist.daps.dla.mil.
AMSC N/A
FSC 5962
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |