 |
|||
|
Page Title:
Recommended operating conditions. |
|
||
| ||||||||||
|
|  MIL-M-38510/61C
1.3 Absolute maximum ratings.
Supply voltage range .............................................................................. 0 V to -7.0 V
Input voltage range ................................................................................ 0 V to VEE (most negative power
supply voltage
Storage temperature range .................................................................... -65 to +150C
Maximum power dissipation, (PD) 1/
Device type 01 .................................................................................. 165 mW
Device type 02 .................................................................................. 190 mW
Device type 03 .................................................................................. 105 mW
Device type 04 .................................................................................. 200 mW
Lead temperature (soldering, 10 seconds) ............................................. +260C
Junction temperature (TJ) 2/ ................................................................... 165C
Maximum output current ......................................................................... -50 mA
Thermal resistance, junction to case (θJC):
Cases E, F and 2 .................................................................................. (See MIL-STD-1835)
1.4 Recommended operating conditions.
Supply voltage (VEE) ........................................................................... -5.46 V minimum to 4.94 V maximum
Minimum high level input voltage (VIH) ............................................... -1.105 V at TC = 25C
-1.000 V at TC = 125C
(at 500 linear feet per minute) (ft/min)
-1.255 V at TC = -55C
Maximum low level input voltage (VIL) ................................................ -1.475 V at TC = 25C
-1.400 V at TC = 125C
(at 500 linear ft/min)
-1.510 V at TC = -55C
Normalized fanout (each output) ........................................................... 10
3/
Case operating temperature range (TC) (at 500 linear ft/min).............. -55 to +125C
Case operating temperature (at still air)
Device types 01, 02, 04 (cases E and F): ......................................... -55 to +125C
Device type 03:
(case E) ....................................................................................... -55 to +100C
(case F) ....................................................................................... -55 to +110C
Input data setup time, (tSETUP)
Device type 01 .................................................................................
2.5 ns minimum
Device type 02 .................................................................................
1.0 ns minimum
Device type 03 .................................................................................
2.5 ns minimum
Device type 04 .................................................................................
2.5 ns minimum
Input data hold time, (tHOLD)
Device type 01 .................................................................................
1.5 ns minimum
Device type 02 .................................................................................
0.75 ns minimum
Device type 03 .................................................................................
1.5 ns minimum
Device type 04 .................................................................................
1.5 ns minimum
_______
1/ Must withstand the added PD due to short-circuit test (e.g., IOS).
2/ Maximum junction temperature should not be exceeded except in accordance with allowable short
duration burn-in screening condition in accordance with MIL-PRF-38535.
3/ Device will fanout in both high and low levels to the specified number of data inputs on the same device
type as that being tested.
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals