|
| INCH-POUND
MIL-M-38510/62B
9 November 2005
SUPERSEDING
MIL-M-38510/62A
17 June 1985
MILITARY SPECIFICATION
MICROCIRCUITS, DIGITAL, ECL, AND/NAND GATES,
MONOLITHIC SILICON
Inactive for new design after 8 July 1997.
This specification is approved for use by all Depart-
ments and Agencies of the Department of Defense.
The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF 38535
1. SCOPE
1.1 Scope. This specification covers the detail requirements for monolithic, silicon, ECL, logic gating
microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each
type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been
superseded by MIL-PRF-38535, (see 6.4).
1.2 Part or Identifying Number (PIN). The PIN is in accordance with MIL-PRF-38535, and as specified herein.
1.2.1 Device types. The device types are as follows:
Device type
Circuit
01
Triple, and Single AND/NAND gate
02
Hex AND gate
1.2.2 Device class. The device class is the product assurance level as defined in MIL-PRF-38535.
1.2.3 Case outlines. The case outlines are as designated in MIL-STD-1835 and as follows:
Outline letter
Descriptive designator
Terminals
Package style
E
GDIP1-T16 or CDIP2-T16
16
Dual-in-line
F
GDFP2-F16 or CDFP3-F16
16
Flat-pack
2
CQCC1-N20
20
Square chip carrier
Comments, suggestions, or questions on this document should be addressed to: Commander, Defense
Supply Center Columbus, ATTN: DSCC-VAS, P. O. Box 3990, Columbus, OH 43218-3990, or emailed to
bipolar@dla.mil. Since contact information can change, you may want to verify the currency of this address
information using the ASSIST Online database at http://assist.daps.dla.mil.
AMSC N/A
FSC 5962
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |