|
| INCH POUND
MIL-M-38510/81D
20 JULY 2005___
SUPERSEDING
MIL-M-38510/81C
6 NOVEMBER 1987
MILITARY SPECIFICATION
MICROCIRCUITS, DIGITAL, BIPOLAR, SCHOTTKY TTL,
LINE DRIVERS, MONOLITHIC SILICON
Inactive for new design after 23 August 1996.
This specification is approved for use by all Depart-
ments and Agencies of the Department of Defense.
The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF 38535.
1. SCOPE
1.1 Scope. This specification covers the detail requirements for monolithic, silicon, Schottky, TTL, line drivers.
Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the
complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-
38535, (see 6.4).
1.2 Part or Identifying Number (PIN). The PIN is in accordance with MIL-PRF-38535, and as specified herein.
1.2.1 Device type. The device type is as follows:
Device type
Circuit
01
Dual, 4 input NAND 50 ohm line driver
1.2.2 Device class. The device class is the product assurance level as defined in MIL-PRF-38535.
1.2.3 Case outlines. The case outlines are as designated in MIL-STD-1835 and as follows:
Outline letter
Descriptive designator
Terminals
Package style
A
GDFP5-F14, CDFP6-F14
14
Flat package
B
GDFP4-F14
14
Flat package
C
GDIP1-T14, CDIP2-T14
14
Dual in line package
D
GDFP1-F14, CDFP2-F14
14
Flat Package
X
CQCC2-N20
20
Square chip carrier package
2
CQCC1-N20
20
Square chip carrier package
Comments, suggestions, or questions on this document should be addressed to: Commander, Defense
Supply Center Columbus, ATTN: DSCC-VAS, P. O. Box 3990, Columbus, OH 43218-3990, or emailed to
bipolar@dscc.dla.mil. Since contact information can change, you may want to verify the currency of this
address information using the ASSIST Online database at http://assist.daps.dla.mil.
AMSC N/A
FSC 5962
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |