 |
|||
|
|
|||
| ||||||||||
|
|  MIL-M-45013E (AR)
3.3.4 Bolt assembly (11010357). With the cover assembly
(7269114) opened and the bolt assembly disengaged from the
operating rod yoke (9362509), the bolt assembly shall move of its
own weight through its full range of travel in the slideways of
the receiver assembly (11686308). Firing pin postrusion shall be
as specified on dwg 11010357. The bolt assembly shall be proof
and magnetic particle inspection marked in accordance with dwg
11010358.
3.3.4.1 Cam actuator assembly (7269063). The cam actuator
assemblv shall be retained on the bolt assembly (11919357) by the
bolt plug assembly (9362505) and shall rotate without binding on
the bolt assembly (9362505) and shall rotate without binding. on
the bolt assembly. The bolt guide roller (7269091) and the cam
actuator roller (7269090) shall be retained on the cam actuator
assembly by the roller rivet (7269089) and shall rotate without
binding on the cam actuator assembly.
3.3.4.2 Ejector (11010375). The ejector shall be retained
in the bolt (1101O358) by the spring Pin (MS 39086-81) and shall
be held in the forward position by spring action. the ejector
shall move through its full range of travel under spring action
without binding.
3.3.4.3 Extractor (7790907). The extractor shall be
retained din the bolt (11010358) by the extractor plunger
(7269083) and spring (7269086). The extractor shall move through
its full range of travel under spring action without binding.
3.3.4.4 Firing pin (11010376). The firing pin shall move
through its full range of travel in the bolt (11010358) under
spring action without binding.
3.3.5 Buffer assembly (11010518). The buffer assembly shall
be retained in the receiver assembly (11686308) by the buffer
retaining yoke (11699786). The buffer retaining yoke and the
buffer assembly shall disassemble from the receiver assembly
without the use of tools. The plunger (11010541) shall be
capable of being moved through its full range of travel in the
buffer body (11010543) and shall return to its original position
by spring action after partial or full travel.
3.3.6 Butt Stock assembly (11686711). The but stock
assembly shall be retained on the receiver assembly (11686308) by
the buffer assembly (11010518) under spring action of the latch
(7269313). The butt stock assembly shall disassemble from the
receiver assembly when the latch is depressed using a tool
simulating the bullet nose of a cartridge and shall manually
reassemble to the receiver assembly without the use of tools.
7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals