 |
|||
|
|
|||
| ||||||||||
|
|  MIL-M-45013E (AR)
Examine firing pin protrusion using the inspection
b.
equipment in. accordance with drawing 7274295 (see
11010357).
Visually examine to assure that ejector face is flush
c.
with or below front of bolt (see 11010357) .
Manually examine cam actuator assembly for compliance
d.
with 3.3.4.1.
Manually examine retention and spring action of ejector
e.
for compliance with 3.3.4.2.
Manually examine spring action of extractor for com-
f.
pliance with 3.3.4.3.
Manually examine firing pin for compliance with 3.3.4.4.
g.
4.4.2.2.7 Disassembly of bolt assembly.
Disassemble all parts except ejector from bolt assembly.
a.
visually and manually examine all parts for mutilations,
b.
breaks, or cracks.
Visually and manually examine bolts ligs, operating cam
c.
cut, rollers, guideways, cam actuator assembly, extractor
lips, and ejector face for cracks, burrs, sharp edges, or
deformations.
Visually examine firing pin striker point; it shall be
d.
smooth and free of pits and burrs. Examine fillet radii
at spools for cracks and deformation.
Reassemble bolt assembly, assuring that cam actuator
e.
assembly is properly assembled with roller end forward on
bolt and that extractor is securely retained by the
plunger and spring.
4.4.2.2.8 Triqqer mechanism grip assembly.
a.
Disassemble trigger mechanism assembly from receiver
assembly manually examining for compliance with 3.3.14.
b.
Visually examine for secure riveting of trigger mechanism
frame assembly to channel assembly.
Visually and manually examine safety for compliance with
c.
3.3.14.1.
18
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals