 |
|||
|
Page Title:
Firing pin indent and trigger pull testing |
|
||
| ||||||||||
|
|  MIL-M-45013E (AR)
4.4.2.3.1 Classification of characteristics for packaging.
Characteristic
Category
Critical: None defined.
Major:
Marking is legible and correct
101.
Correct location of marking
102.
proper level of packaging and packing
103.
(See procurement documents)
Adequate cleaning and drying
104.
proper preservative application and drainage
105.
Proper closure of interior packages
106.
Proper closure and strapping of shipping containers
107.
All items of equipment present
108.
Proper assembly of package: position of assemblies
109.
in supports, position of separator between supports
and assembly of cells
Minor:
Workmanship
201.
4.4.2.3.2 Repair parts. Examination of packaging of repair
parts shall be performed in accordance with the criteria
specified in the contract (see 6.2) .
4.4.3 Testing.
4.4.3.1 Headspace testing. The contractor shall test each
machine gun for headspace using the test methods specified in
4.5.1. The machine gun failing to meet the requirements shall be
rejected and a failure analysis (see 6.2) performed by the
contractor.
4.4.3.2 Firing pin indent and trigger pull
testing. The
contractor shall test a sample of ten machine guns
selected by
the Government representative from each inspection
lot for firing
pin indent and trigger pull using the test methods
specified in
4.5.2 and 4.5.3, respectively.
4.4.3.2.1 Firing pin indent. If any firing pin indent is
not within the requirements (3.4.2), it shall be disregarded and
three more inpressions shall be taken. The average depth of the
three indents of each test shall be within requirements. All
firing pin indent impressions shall not be off center more than
23
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals