 |
|||
|
|
|||
| ||||||||||
|
|  MIL-M-45945A
3.3.4.1 Cam actuator assembly 7269063) . The cam actuator
assembly shall be retained on the bolt assembly (11919357) by the
bolt plug assembly (9362505) and shall rotate without binding on
the bolt assembly (9362505) and shall rotate without binding on
the bolt assembly The bolt guide roller (7269091) and the cam
actuator roller (7269090) shall be retained on the cam actuator
assembly by the roller rivet (7269089) and shall rotate without
binding on the cam actuator assembly.
3.3.4.2 Ejector (11010375). The ejector shall be retained.
in the bolt (11010358) by the spring pin (MS39086-81) and shall
be held in the forward position by spring action. The ejector
shall move through its full range of travel under spring action
without binding.
(7790907). The extractor shall be
3.3.4.3 Extractor
retained in the bolt (11010358) by the extractor plunger
(7269083) and spring (7269086). The extractor shall move through
its full range of travel under spring action without binding.
3.3.4.4 Firing pin (11010376). The firing pin shall move
through its full range of travel in the bolt (11010358) under.
Spring action without binding.
3.3.5 Buffer assembly (11010518). The buffer assembly shall
be retained in the receiver assembly (11686308) by the buffer
retaining yoke (11699786) . The buffer retaining yoke and the
buffer assembly shall disassemble from the receiver assembly
without the use of tools. The plunger 911010541) shall be
capable of being moved through its full range of travel in the
buffer body (11010543) and shall return to its original position
by spring action after partial or full travel.
3.3.6 Back plate assemblly spade grip (11699751) The back
plate assembly shall be securely retained on the receiver
assembly (11686308) by the knob and pin assembly (11699769) so
there shall be no relative movement. The back plate assembly
shall readily assemble to and disassemble from the receiver
assembly without the use of tools.
The knob and pin
3.3.6.1 Knob and pin assembly (11699769).
assembly shall be retained in the back plate assembly by the
retaining ring (11699772)
3.3.6.2 Koob lock pin (11699768). The knob lock pin shall
be retained in the trigger and frame assembly (11699752) by the
spring pin (MS 16562-151) and shall move through Its full range
of travel without binding. The knob lock pin shall be normally
7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals